|
Enquiry No |
Date |
Description |
Due Date |
|
SCM/7421/ECO.COILS/037 |
10.04.12 |
Marking, Cutting, Bending of coil
tubes to required length, radius, Heat Treatment of inner bends (Radius 38.1)
as per HT Procedure No. : H-014B-12 Dt. 30.01.2012 and H-014-12 Dt.: 30.01.2012
(Copy Enclosed), Drgs. & QAP No.: CQP 7421/04
Rev.01, Dt.: 10.09.2011. |
23.04.2012 Due date
extended to 30.4.2012 |
|
SCM/7421,7417&7418/COMPONENTS/036 |
10.03.12 |
Tender Enquiry for Machining of Pressure Parts for S.O. Nos. 7421 for BHEL
– Trichy (JSPL – III) and 7417 & 7418 for BHEL – Trichy
(IOCL – Paradeep) |
22.03.2012 |
|
SCM/7421/COMPONENTS/035 |
08.03.12 |
Tender Enquiry for
Machining & Fabrication of components for Non Pressure Parts against
W.O.NOs. 7421- 01,02,12,30 & 31 (PGMA 04-114,144, 19- 114,121, 708 850,
854,80-145, 81-005&011). |
26.03.2012 |
|
SCM/7421/COMPONENTS/033 |
13.02.12 |
Tender Enquiry for
Machining of Blind flanges, DE Covers, Drain Nipples, Equal Tees, FE Covers, Hand Hole Pipes, HS
D’ Ends, Nipples, RG Plugs, S.O.W Flanges, Tubes, T C Nipples, Tees etc. for S.O. No. 7421 for
BHEL – Trichy (JSPL – III) |
28.02.2012 |
|
SCM/7421/STRAP/PLATES/027 |
29.12.11 |
Tender enquiry for
Fabrication of SS/LAS/CS Non pressure parts W.O.7421-09 |
11.01.2012 |
|
SCM/7448/SUPPORT TUBE SHEET/026 |
29.12.11 |
Tender enquiry for drilling
of holes cutting slots in Support tube Plates W.O. 7448-01 Ø Notes |
12.01.2012 |
|
SCM/7417-7418/COMPONENTS/025 |
23.12.2011 |
Tender Enquiry for
Machining of Boiler Drum components with welded attachments of 300 TPH Boiler
for IOCL, Paradip against W.O.No.7417-01 &
7418-01 (PGMA 04-114) |
07.01.2012 |
|
SCM/7483/SS BUSHING
BOX / 024 |
15.12.11 |
Tender Enquiry for
fabrication of Stainless Steel Terminal Bushing Box for BHEL-Hardwar against
W.O. No. 7483 - 01. |
29.12.2011 |
|
SCM/7483/ COMPONENTS/023 |
13.12.11 |
Tender Enquiry for
Machining of SS Components of Terminal Bushing Box against W.O.NO.7483-01 |
28.12.2011 |
|
SCM/7421/clips/022 |
07.11.11 |
Tender Enquiry for
Cutting & Machining of CS/SS Stopper Plates, Suspension Plates, Support
Clips against W.O.NOs.7421-12. |
25.11.2011 |
|
SCM/7417-7418/COMPONENTS/021 |
07.11.11 |
Tender enquiry for
Machining of Coil & Fin supports components of 300 TPH Boiler 3 & 4
of IOCL Paradip against W.O. 7417-12 & 7418-12 |
24.11.2011 |
|
SCM/7417-7418/COMPONENTS/020 |
07.11.11 |
Tender Enquiry for
Drilling, Beveling and Machining of Economiser
Header components of 300 TPH Boiler 3 & 4 of IOCL, Paradip
against W.O.No.7417-12 & 7418-12. |
23.11.2011 |
|
SCM/7454/TUBESHEET/019 |
4.11.2011 |
Drilling holes in
Main Tube plates of Front water chamber (Gen. side), Rear water chamber (Tur.
Side), Front water chamber (Tur. Side) and Rear water chamber (Gen. side) as
per drawings and specifications. Total Qty.--
08 Nos. |
21.11.2011 |
|
SCM/5583/INNERVESSEL/018 |
4.11.2011 |
Complete fabrication
of SS Inner Vessel (Part Nos.
100 series except 128 to 130,133 & 134 of BOM Sheet 2 to 9) including
preliminary air test to a pressure of 1.5 Kg / Sq.cm, 100% Radiography,
Surface Preparation by pickling and passivation as per the drawings listed at
annexure-II, approved QAP, WPS etc., against W.O. No: 5583 01 |
19.11.2011 |
|
SCM/7426/D’ENDS/017 |
01.11.2011 |
Tender Enquiry for
Cold forming of D’ Ends against W.O.No.7426-03. Ø Drawing |
18.11.2011 Due date
extended to 26.11.11 |
|
SCM/7417&7418/
COMPONENTS/016 |
28.10.2011 |
Tender Enquiry for
Machining of Circulation system components of 300 TPH Boiler 3&4 of IOCL Paradip against
W.O.NOs.7417-05 & 7418-05 |
17.11.2011 |
|
SCM/7417,7418 &
7481/FIXTURES/015 |
28.10.11 |
Tender Enquiry for Machining of Fixtures against W.O.No.7417 - 01, 7418 - 01 & 7481 - 01. |
16.11.11 |
|
SCM/7417-7418/COMPONENTS/013 |
03.10.2011 |
Tender Enquiry for Drilling, Beveling and Bending of Super
Heater Header components against W.O.No.7417-08 & 7418 - 08. |
20.10.2011 |
|
|
|
Vendor Registration Form |
|